Prepare a 1.0 mm frame cutter and 2.0 mm cutter for internal machining. Follow the iPhone 16 K150 video for the two machining stages of a physical SIM conversion project.
The iPhone 16 workflow combines a 1.0 mm frame cutter with a 2.0 mm inside cutter. Do not confuse this entry with iPhone 16e: the supplied 16e guide does not require inside machining.
This guide is for repair technicians preparing SIM slot machining as part of a physical SIM modification job. It documents the K150 machining task; the remaining components and modification steps must be checked separately for the device being worked on.
iPhone 16 SIM Slot Cutting Tools and Cutter Sizes
| Item | Required setup |
|---|---|
| Machine | Xwitzeal K150 |
| Phone model | iPhone 16 |
| Frame cutter | 1.0 mm |
| Inside machining | Required |
| Inside cutter | 2.0 mm cutter |
| Fixture | Use the matching model setup shown in the demonstration; confirm the exact fixture with Xwitzeal if needed. |
iPhone 16 SIM Card Slot Cutting Video
Watch this iPhone 16 tutorial on YouTube.
Before Machining: Model, Cutter and Fixture Checks
- Confirm the complete model name. Match iPhone 16 to the job selection and fixture shown in its own tutorial.
- Prepare the listed tooling. Keep the 1.0 mm frame cutter and 2.0 mm cutter for their respective operations.
- Review positioning and machining before starting. Follow the model-specific demonstration and machine instructions. Cutter diameter alone does not establish spindle speed, feed rate or cutting depth.
- Check the result before continuing the modification. Review the machined area and intended SIM tray fit. If the housing or setup differs from the demonstration, ask the technical team to confirm the next step.
iPhone 16 SIM Slot Machining FAQ
Does iPhone 16 need inside machining?
Yes, the supplied K150 workflow includes inside machining with a 2.0 mm cutter. Use the frame and inside cutters for the separate machining areas identified in the demonstration.
Can I use another model's settings?
Use the guide for the exact model. For comparison, iPhone 16e has its own K150 tooling guide. Shared cutter sizes do not establish identical positioning or machining settings.
Does SIM slot cutting complete an eSIM-to-physical-SIM conversion?
This tutorial covers the mechanical machining task. It does not establish the full electronic conversion process, network compatibility or carrier-unlock status.
Explore the K150 SIM Slot Cutting Machine
Browse the K150 model selector and all demonstrations, or view the K150 machine and purchase options.
Need help matching the cutter or fixture? Ask Xwitzeal technical support about iPhone 16.