Complete Tutorial for Better Screen Repair Results
If you’ve just purchased the JYBY2 Automatic Phone Press Machine, congratulations—you’ve upgraded your repair setup.
The JYBY2 is designed to make:
-
screen bonding easier
-
adhesive curing faster
-
repairs more consistent
-
technician workflow is more efficient
But to get the best results, it’s important to use it correctly.
In this step-by-step guide, we’ll show you exactly how to use the JYBY2 Automatic Mobile Phone Press Machine for professional smartphone repair.
Watch the Full JYBY2 Tutorial Video
Before reading, you can watch the official tutorial here:
▶ JYBY2 Tutorial Video
Watch on YouTube
This video demonstrates the full workflow.
What You Need Before Starting
Prepare the following:
✔ repaired phone (screen installed)
✔ adhesive already applied
✔ cleaning cloth
✔ sponge pad/silicone pad
✔ JYBY2 machine powered on
Make sure:
-
No dust remains under the screen
-
Flex cables are properly connected
-
screen alignment is completed first
Step 1: Power On the JYBY2
Turn on the machine using the power switch.
The digital touchscreen will light up and display:
-
temperature
-
pressure
-
timer
-
start button
Wait for the machine to initialize.
Step 2: Place the Phone on the Silicone Pad
Open the press area and place your repaired phone flat on the bottom platform.
Important:
-
Center the device
-
align evenly
-
avoid tilted placement
Using the included sponge pad helps protect:
-
curved screens
-
camera bumps
-
back glass
Pro tip:
Always use the pad for iPhone OLED repairs.
Step 3: Set Temperature
Tap the temperature setting.
Recommended settings:
| Repair Type | Suggested Temp |
|---|---|
| Screen bonding | 40–60°C |
| Strong adhesive | 60–80°C |
| Sensitive OLED | 35–45°C |
Do not overheat.
Too much heat can damage:
-
OLED
-
battery
-
flex cable
Step 4: Set Pressure
Adjust the pressure according to the repair type.
Suggested pressure:
| Repair Type | Pressure |
|---|---|
| Screen replacement | 8–15KG |
| Frame bonding | 15–25KG |
| Strong frame repair | 25–40KG |
The JYBY2 supports 0–50KG adjustable pressure.
Higher pressure is not always better.
Use only what is needed.
Step 5: Set Pressing Time
Recommended timer:
-
light bonding: 30–60 sec
-
standard repair: 60–120 sec
-
strong adhesive curing: 180 sec
Most iPhone repairs work well at:
60–90 seconds
Step 6: Press Start
Tap Start on the touchscreen.
Now the machine will automatically:
✔ apply pressure
✔ maintain temperature
✔ hold timing accurately
No manual monitoring needed.
This is where JYBY2 saves time.
Step 7: Wait for Automatic Completion
Once complete:
-
pressure releases automatically
-
cooling begins
-
remove phone carefully
Check:
-
screen edges
-
frame fit
-
adhesive seal
Your repair should now have a factory-like finish.
Common Beginner Mistakes to Avoid
Too Much Pressure
Can crack OLED screens.
Always start low.
Too Much Heat
Can damage internal components.
Stay under the recommended temperature.
Wrong Positioning
Off-center placement causes uneven bonding.
Always align carefully.
Skipping the Pad
Never place a phone directly on metal.
Use the silicone pad every time.
Best Settings for iPhone Screen Repair
Recommended quick preset:
Temperature: 50°C
Pressure: 10KG
Time: 90 sec
Works well for:
-
iPhone 11
-
iPhone 12
-
iPhone 13
-
iPhone 14
-
iPhone 15
Adjust if needed.
Maintenance Tips
To keep your JYBY2 running smoothly:
✔ Clean platform daily
✔ Wipe silicone pad
✔ Check cooling fans weekly
✔ Avoid liquid spills
✔ Store in a dry environment
Proper maintenance extends machine life.
Final Thoughts
The JYBY2 Automatic Phone Press Machine is designed to make professional repair simple:
-
Place device
-
Set parameters
-
Press Start
That’s it.
Whether you’re a beginner or professional technician, JYBY2 helps you deliver:
-
better bonding
-
fewer repair failures
-
happier customers